✨ New Arrivals Just Dropped!Explore
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
HomeStore

Honda K Series Rear Mainshaft Ball Bearing 91002-RAS-003

Honda K Series Rear Mainshaft Ball Bearing 91002-RAS-003

  • Genuine Honda Product
  • Direct Factory Replacement Part
  • Compatible with Most K Series Transmissions
  • Installs on Mainshaft, 6th Gear
  • Description
  • Vehicle Fitment
  • Technical Data
  • Included
  • Honda OEM K Series Rear Mainshaft Ball Bearing - 91002-RBB-003

    Rebuilding your K series transmission? This is the genuine Honda rear mainshaft ball bearing for K series gearboxes. It installs on the rear of the mainshaft, opposite of the pilot bushing. It's the same bearing that came in your transmission from the factory, so it fits right and lasts. If your rear mainshaft bearing is worn out or noisy, you'll hear grinding or whining from the transmission. Replace it with this OEM bearing and your trans will shift smooth and quiet again. Part number 91002-RBB-003.

    Why You Need OEM on a Mainshaft Bearing

    The rear mainshaft bearing handles all the torque that goes through your transmission. It spins constantly whenever the car's moving, which means it takes a beating. Cheap aftermarket bearings often use lower quality steel or looser tolerances, so they wear out faster or make noise even when they're new. This genuine Honda bearing is built to the same specs as the original, so you get the reliability and service life Honda engineered into your transmission.

    When to Replace It

    If you're hearing grinding, whining, or growling from your transmission that changes with speed, your rear mainshaft bearing is probably worn out. You'll also want to replace it if you're doing a transmission rebuild or if you're swapping in a used trans and want to make sure the bearings are fresh. Don't reuse a questionable bearing and end up tearing the transmission apart again in six months.

    Fits These Transmissions

    • K series manual transmissions
    • Verify fitment with part number 91002-RBB-003

    Specifications

    • Honda part number: 91002-RBB-003
    • Genuine Honda OEM replacement
    • Rear mainshaft ball bearing for K series transmissions
    • Located on rear of mainshaft, opposite of pilot bushing

    Note: Verify your part number before ordering. This bearing is for K series manual transmissions only. If you're rebuilding your transmission, replace all the bearings and synchros while you're in there.

  • 2013-2015 Acura ILX
    2002-2006 Acura RSX
    2004-2014 Acura TSX
    2003-2012 Honda Accord
    2002-2015 Honda Civic Si
    2002-2006 Honda CR-V
    2003-2010 Honda Element
  • Ball Bearing: 28x72x18
  • (1) Mainshaft Bearing
$81.17
Honda K Series Rear Mainshaft Ball Bearing 91002-RAS-003
$81.17

Product Information

Shipping & Returns

Description

  • Genuine Honda Product
  • Direct Factory Replacement Part
  • Compatible with Most K Series Transmissions
  • Installs on Mainshaft, 6th Gear
  • Description
  • Vehicle Fitment
  • Technical Data
  • Included
  • Honda OEM K Series Rear Mainshaft Ball Bearing - 91002-RBB-003

    Rebuilding your K series transmission? This is the genuine Honda rear mainshaft ball bearing for K series gearboxes. It installs on the rear of the mainshaft, opposite of the pilot bushing. It's the same bearing that came in your transmission from the factory, so it fits right and lasts. If your rear mainshaft bearing is worn out or noisy, you'll hear grinding or whining from the transmission. Replace it with this OEM bearing and your trans will shift smooth and quiet again. Part number 91002-RBB-003.

    Why You Need OEM on a Mainshaft Bearing

    The rear mainshaft bearing handles all the torque that goes through your transmission. It spins constantly whenever the car's moving, which means it takes a beating. Cheap aftermarket bearings often use lower quality steel or looser tolerances, so they wear out faster or make noise even when they're new. This genuine Honda bearing is built to the same specs as the original, so you get the reliability and service life Honda engineered into your transmission.

    When to Replace It

    If you're hearing grinding, whining, or growling from your transmission that changes with speed, your rear mainshaft bearing is probably worn out. You'll also want to replace it if you're doing a transmission rebuild or if you're swapping in a used trans and want to make sure the bearings are fresh. Don't reuse a questionable bearing and end up tearing the transmission apart again in six months.

    Fits These Transmissions

    • K series manual transmissions
    • Verify fitment with part number 91002-RBB-003

    Specifications

    • Honda part number: 91002-RBB-003
    • Genuine Honda OEM replacement
    • Rear mainshaft ball bearing for K series transmissions
    • Located on rear of mainshaft, opposite of pilot bushing

    Note: Verify your part number before ordering. This bearing is for K series manual transmissions only. If you're rebuilding your transmission, replace all the bearings and synchros while you're in there.

  • 2013-2015 Acura ILX
    2002-2006 Acura RSX
    2004-2014 Acura TSX
    2003-2012 Honda Accord
    2002-2015 Honda Civic Si
    2002-2006 Honda CR-V
    2003-2010 Honda Element
  • Ball Bearing: 28x72x18
  • (1) Mainshaft Bearing

You may also like

-70%NEW
Thumbnail 1Thumbnail 2

Honda K20/K24 Head Gaskets

$138.41

$41.52

NEW
Thumbnail 1Thumbnail 2

Hondata 4 Bar MAP Sensor for Honda/Acura K Series

$94.00

-70%NEW
Thumbnail 1Thumbnail 2

Honda RBC Intake Manifold 17100-RRB-A00

$599.99

$180.00

-70%NEW
Thumbnail 1Thumbnail 2

Competition Clutch Stage 1 Gravity Clutch for K20A3/A4

$350.00

$105.00

-70%NEW
Thumbnail 1Thumbnail 2

Hybrid Racing Stainless Steel Competition Shift Rod

$107.99

$32.40

-70%NEW
Thumbnail 1Thumbnail 2

Hasport Front Engine Mount for 03-07 Accord/04-08 TSX

$254.00

$76.20

NEW
Thumbnail 1Thumbnail 2

Hasport Performance Rear Engine Mount for 03-07 Accord/04-08 TSX

$254.00

NEW
Thumbnail 1Thumbnail 2

Hybrid Racing Heavy-Duty Gear Selector Springs

$24.99

NEW
Thumbnail 1Thumbnail 2

Hybrid Racing 3" Velocity Stack and Filter

$69.98

NEW
Thumbnail 1Thumbnail 2

Hybrid Racing Replacement Coolant Switch

$33.74

NEW
Thumbnail 1Thumbnail 2

Hybrid Racing Clutch Slave Cylinder for 04-08 TSX/02-04 RSX

$99.99

NEW
Thumbnail 1Thumbnail 2

Hybrid Racing 130R Delrin Shift Knob

$53.99